7″ (16:9) · 16 channels · 14 transistor outputs
Samkoon GT-070-30MT-8TC combines operator interaction, control logic and field I/O in one HMI + PLC platform; verify its exact I/O and communications against the machine architecture.
Review the front panel, rear I/O and connector layout before planning the enclosure.
Use the official drawing together with the nominal catalogue values when planning panel machining and terminal access.
All source-qualified values are visible by topic; no decision-critical data is hidden behind an expandable panel.
| Display size | 7″ (16:9) |
|---|---|
| Resolution | 1024 × 600 pixels |
| Outer dimensions | 204 × 148 × 45 mm |
| Weight | 738 g |
| Enclosure material | ABS + PC Engineering Plastic |
| Touch panel | 4-wire high-precision resistive touchscreen |
| Colour depth | 16.77 million |
| Backlight | LED |
| Contrast ratio | 400:1 |
| Brightness | 450 cd/m² |
| Processor | Cortex-A7 Dual-core 1GHz |
|---|---|
| Memory | 128MB DDR |
| Protection rating | IP65 Front Panel |
| Dielectric withstand | 1000V AC, 1 minute |
| ESD resistance | ±6 kV |
| CE | EN55032 / EN55035 |
| Digital inputs | 16 channels |
|---|---|
| Digital outputs | 14 transistor outputs |
| High-speed counters | Up to 2 channels, 200kHz |
| High-speed pulse outputs | Up to 4 channels, 200kHz |
| Temperature input | 8 × K/T Thermocouple Inputs |
| Power supply | DC 24V ±15% |
|---|---|
| Ethernet | Supported |
| Ethernet communication | Supported |
| Operating temperature | -20°C – 55°C |
|---|---|
| Programming software | SKTOOL 7.1 |
| Vibration resistance | 10–25Hz, XYZ direction, 2G / 30min |
Links open the current files published by Samkoon; confirm language and revision before commissioning.
Compare published technical values and the complete model code before selection.
Current product-centre record — Listed in Samkoon's current .cn product centre.
Official sources checked on 24 August 2026. Samkoon current product centre · Samkoon English product catalogue
Share the application, I/O, communication and mounting requirements with our engineering team.