Electrical class
Supply: AC 20-80 V · Rated current: 1.8 – 8.2
Samkoon Servo
Samkoon MC-0808CA2
closed-loop drives for stepper applications with feedback
Samkoon MC-0808CA2 belongs to the closed-loop drives for stepper applications with feedback portfolio. Electrical class, motion output and command architecture must be matched as one drive-and-machine system.
Outer dimensions150 × 97.5 × 53
Power supplyAC 20-80 V
Operating current1.8 – 8.2
Input signal voltageDC 24 V
Control input current7 – 24
Microstep subdivision400 – 51,200
Four points that define this configuration
Each point is tied to published model data or an explicit engineering verification step.
Motion output
Match torque-speed duty to the machine inertia and operating cycle.
Command and network
Confirm pulse, analogue or network command architecture before selection.
Motor and mechanics match
Dimensions: 150 × 97.5 × 53
System architecture
Match the complete motion chain
A valid selection joins the electrical supply, drive stage, motor mechanics and control interface.
Supply and drive stageSupply: AC 20-80 V · Rated current: 1.8 – 8.2
Motor and loadMotor frame, torque-speed duty and machine inertia
Command and feedbackCommand method, feedback type and controller compatibility
Specifications arranged for engineering review
All source-qualified values are visible by topic; no decision-critical data is hidden behind an expandable panel.
Mechanical construction
| Outer dimensions | 150 × 97.5 × 53 |
|---|
Motion and control
| Microstep subdivision | 400 – 51,200 |
|---|
Power and interfaces
| Power supply | AC 20-80 V |
|---|---|
| Operating current | 1.8 – 8.2 |
| Input signal voltage | DC 24 V |
| Control input current | 7 – 24 |
Where this configuration can be evaluated
These are engineering fit scenarios; final approval depends on project-specific electrical, mechanical and safety checks.
Positioning axes
Axes whose torque, speed, feedback and command requirements match the complete drive-motor set.
Packaging and handling motion
Cyclic motion applications sized from the real load profile rather than model code alone.
Controller integration
Motion axes whose command and feedback architecture is confirmed from the exact variant.
OEM motion subsystems
Repeatable drive, motor, cable and feedback packages documented as one approved configuration.
Official product and catalogue records
Use these manufacturer records to confirm model identity, lifecycle and the current document revision.
Compare nearby configurations with named technical fields
Only published values are compared; a dash means that the current source does not state the field.
| Model | Dimensions |
|---|---|
| MC-0808CA2Current model | 150 × 97.5 × 53 |
| MC-0808CD2 | 150 × 97.5 × 53 |
| MC-0506CD2 | 118 × 76 × 34 |
Answers needed before model approval
Answers use published values where available and identify the checks that still require the current official record.
What electrical class is published?
Supply: AC 20-80 V · Rated current: 1.8 – 8.2
What torque and speed are stated?
No structured torque and speed value is available in the current source; confirm it with the motor match.
Which command interface is used?
Confirm command and feedback interfaces from the exact variant.
Can the motor be selected independently?
No. Confirm drive, motor, encoder, brake, cable and mechanical load as one engineering set.
Official product records
Official English catalogue record — Published by Samkoon's official English catalogue; confirm lifecycle and availability with ProControl before final selection.
Technical sources
Official sources checked on 24 August 2026. Samkoon English product catalogue
Confirm the right Samkoon configuration
Share the application, I/O, communication and mounting requirements with our engineering team.