Display and mechanical
| Outer dimensions | 57 × 199 × 182 mm |
|---|---|
| Weight | 1500 g |

1500 W
Samkoon R8-2215Z-N belongs to the motion-control portfolio. Match the electrical class, motor mechanics and command architecture before final selection.
All source-qualified values are visible by topic; no decision-critical data is hidden behind an expandable panel.
| Outer dimensions | 57 × 199 × 182 mm |
|---|---|
| Weight | 1500 g |
| Protection rating | IP30 |
|---|
| Control mode | CSP (Cycle Synchronized Position Mode) 1ms CSV (Cycle Synchronized Velocity Mode) 500usCST (Cycle Synchronized Torque Mode) 125usPP (Profile Position Mode) 1ms PV (Profile Velocity Mode) 500usPT (ProfiLeTorque Mode) 125usHM (Homing Mode) 1ms |
|---|
| Rated output power | 1500 W |
|---|---|
| Rated output current | 8.4 A |
| Maximum output current | 25.5 A |
| Communication protocol | CoE: CANopen over EtherCAT |
| Input voltage | Single-phase AC 220V/Three-phase AC 220V |
| Operating temperature | 0–45℃ (non-freezing) |
|---|---|
| Programming software | SamkoonServoSetup |
| Operating humidity | 5%–95%RH (non-condensing) |
| Physical layer | 100BASE-TX |
|---|---|
| Transfer rate | 2 × 100Mbps |
| Synchronisation jitter | <1US |
| Product type | EtherCAT Bus Type |
Compare published technical values and the complete model code before selection.
Current product-centre record — Listed in Samkoon's current .cn product centre.
Official sources checked on 24 August 2026. Samkoon current product centre · Samkoon English product catalogue
Share the application, I/O, communication and mounting requirements with our engineering team.