Electrical class
Confirm supply, current and power class from the exact drive or motor code.
Samkoon Servo
Samkoon R9P-2000T
R9 servo drives with a broad range of power and control-type options
Samkoon R9P-2000T belongs to the R9 servo drives with a broad range of power and control-type options portfolio. Electrical class, motion output and command architecture must be matched as one drive-and-machine system.
Selection basisSupply, power and command method
Motor matchMotor, encoder and brake set
Load profileTorque, speed and inertia check
IntegrationController, cable and feedback
Four points that define this configuration
Each point is tied to published model data or an explicit engineering verification step.
Motion output
Match torque-speed duty to the machine inertia and operating cycle.
Command and network
Confirm pulse, analogue or network command architecture before selection.
Motor and mechanics match
Verify motor code, encoder, brake, flange and cable compatibility as one set.
System architecture
Match the complete motion chain
A valid selection joins the electrical supply, drive stage, motor mechanics and control interface.
Supply and drive stageSupply class, drive current and braking requirement
Motor and loadMotor frame, torque-speed duty and machine inertia
Command and feedbackCommand method, feedback type and controller compatibility
Examine the product from every side
Review the front panel, rear I/O and connector layout before planning the enclosure.
Model-specific values require current-source confirmation
No inferred values are inserted when the manufacturer record does not expose a reliable structured table.
The product identity is verified; the engineering values are intentionally not guessed.Share the intended application so ProControl can confirm the exact revision, interfaces and compatible accessories.
Where this configuration can be evaluated
These are engineering fit scenarios; final approval depends on project-specific electrical, mechanical and safety checks.
Positioning axes
Axes whose torque, speed, feedback and command requirements match the complete drive-motor set.
Packaging and handling motion
Cyclic motion applications sized from the real load profile rather than model code alone.
Controller integration
Motion axes whose command and feedback architecture is confirmed from the exact variant.
OEM motion subsystems
Repeatable drive, motor, cable and feedback packages documented as one approved configuration.
Official product and catalogue records
Use these manufacturer records to confirm model identity, lifecycle and the current document revision.
Nearby models in the same series
Compare published technical values and the complete model code before selection.
Answers needed before model approval
Answers use published values where available and identify the checks that still require the current official record.
What electrical class is published?
Confirm the electrical class from the complete product code and current selection guide.
What torque and speed are stated?
No structured torque and speed value is available in the current source; confirm it with the motor match.
Which command interface is used?
Confirm command and feedback interfaces from the exact variant.
Can the motor be selected independently?
No. Confirm drive, motor, encoder, brake, cable and mechanical load as one engineering set.
Official product records
Current product-centre record — Listed in Samkoon's current .cn product centre.
Technical sources
Official sources checked on 24 August 2026. Samkoon current product centre
Confirm the right Samkoon configuration
Share the application, I/O, communication and mounting requirements with our engineering team.