Electrical class
Rated current: 4.0 A
Samkoon Servo
Samkoon SY60HS105A
Torque: 2.6 N·m
Samkoon SY60HS105A belongs to the closed-loop stepper motors with multiple torque and frame-length options portfolio. Electrical class, motion output and command architecture must be matched as one drive-and-machine system.
Holding torque2.6 N·m
Rated current4.0 A
Body length105 mm
Resistance0.7 Ω
Inductance3.5 mH
Rotational inertia0.55 kg·cm²
Four points that define this configuration
Each point is tied to published model data or an explicit engineering verification step.
Motion output
Torque: 2.6 N·m
Command and network
Confirm pulse, analogue or network command architecture before selection.
Motor and mechanics match
Verify motor code, encoder, brake, flange and cable compatibility as one set.
System architecture
Match the complete motion chain
A valid selection joins the electrical supply, drive stage, motor mechanics and control interface.
Supply and drive stageRated current: 4.0 A
Motor and loadTorque: 2.6 N·m
Command and feedbackCommand method, feedback type and controller compatibility
Specifications arranged for engineering review
All source-qualified values are visible by topic; no decision-critical data is hidden behind an expandable panel.
Mechanical construction
| Body length | 105 mm |
|---|
System and certification
| Resistance | 0.7 Ω |
|---|---|
| Inductance | 3.5 mH |
Motion and control
| Holding torque | 2.6 N·m |
|---|---|
| Rotational inertia | 0.55 kg·cm² |
Power and interfaces
| Rated current | 4.0 A |
|---|
Where this configuration can be evaluated
These are engineering fit scenarios; final approval depends on project-specific electrical, mechanical and safety checks.
Positioning axes
Axes whose torque, speed, feedback and command requirements match the complete drive-motor set.
Packaging and handling motion
Cyclic motion applications sized from the real load profile rather than model code alone.
Controller integration
Motion axes whose command and feedback architecture is confirmed from the exact variant.
OEM motion subsystems
Repeatable drive, motor, cable and feedback packages documented as one approved configuration.
Official product and catalogue records
Use these manufacturer records to confirm model identity, lifecycle and the current document revision.
Compare nearby configurations with named technical fields
Only published values are compared; a dash means that the current source does not state the field.
| Model | Rated current | Torque |
|---|---|---|
| SY60HS105ACurrent model | 4.0 A | 2.6 N·m |
| SY60HS094A | 3.0 A | 2.2 N·m |
| SY86HS116A | 5.6 A | 7.5 N·m |
| SY57HS108A | 3.0 A | 2.5 N·m |
Answers needed before model approval
Answers use published values where available and identify the checks that still require the current official record.
What electrical class is published?
Rated current: 4.0 A
What torque and speed are stated?
Torque: 2.6 N·m
Which command interface is used?
Confirm command and feedback interfaces from the exact variant.
Can the motor be selected independently?
No. Confirm drive, motor, encoder, brake, cable and mechanical load as one engineering set.
Official product records
Official English catalogue record — Published by Samkoon's official English catalogue; confirm lifecycle and availability with ProControl before final selection.
Technical sources
Official sources checked on 24 August 2026. Samkoon English product catalogue
Confirm the right Samkoon configuration
Share the application, I/O, communication and mounting requirements with our engineering team.