Supports full-duplex or half-duplex modes with auto-negotiation capability
Solidot · Unmanaged Industrial Ethernet Switch
SW4-HUP05C
The 5-Port Fast Ethernet Non-Managed Industrial Ethernet Switch complies with CE standards. Operating within a temperature range of -40℃ to 80℃, the SW4-HUP05C switch offers exceptional durability to withstand harsh environments. It supports one 10/100Base-TX uplink port and four 10/100Base-TX downlink ports, and can be easily installed in space-constrained control cabinets. With DIN-rail mounting, wide-temperature operation, an IP40-rated enclosure, and LED indicators, the SW4-HUP05C provides a reliable and convenient plug-and-play industrial-grade networking solution for Ethernet devices
Unmanaged Industrial Ethernet Switch
Network ProtocolIEEE802.3 10BASE-T；100BASE-T IEEE802.3i 10Base-T；IEEE802.3u； IEEE802.3x
Input VoltageDC9~52V
Input terminalPhoenix terminal
What defines this model
Review the published differences attached to this exact model code rather than only the general family.
IP40 protection rating
network ports feature auto MDI/MDIX
complies with industrial-grade operational standards with an MTBF exceeding 100,000 hours
Place in the system architecture
Treat network, product and field layers as one validation flow.
Line, star or ring requirements
Protocol compatibility and latency budget
Supply, temperature, EMC and mounting
Technical parameters
Values come from Solidot's current official model record and must be reconfirmed for the product revision.
Interface Parameters
| Bus Connection | 5×RJ45 |
|---|---|
| RJ45 Port | 10/100/1000BaseT (X) automatic detection, full/half duplex MDI/MDI-X adaptive |
Technical Parameters
| Input Voltage | DC9~52V |
|---|---|
| Installation method | DIN card rail type, wall mounted installation |
| Network Protocol | IEEE802.3 10BASE-T；100BASE-T IEEE802.3i 10Base-T；IEEE802.3u； IEEE802.3x |
| Transmission Mode | store and forward |
| MAC address | 2K |
| Cache | 768kbit |
| Backplane bandwidth | 1G |
| Power consumption | <3W |
| Operating Temperature | -40℃~+80℃（-40℉~176℉） |
| Exchange Delay | ≤10μs |
| Relative Humidity | 5%~95%, no condensation |
| Storage Temperature | -40℃~+85℃（-40℉~185℉） |
| Input terminal | Phoenix terminal |
| Dual power redundancy | support |
| Protect. Class | IP40 |
| Overcurrent protection | Support built-in overcurrent 4.0A protection |
| Reverse Protection | support |
| Casing | IP40 protection rating, aluminum plate/aluminum alloy enclosure |
| Cooling method | Natural cooling, fanless |
| Module Size | 117×73×29.6mm |
| Mean Time Between Failures | 100000 hours |
| Weight | 250g |
| Warranty | 3 years |
Product images
Images are official source records for the same model.
Official files
Only links published by the manufacturer for this model are listed.
Frequently asked questions
Core checks before selection and commissioning.
Which industrial network does SW4-HUP05C support?
Network support must be confirmed from the exact model code and current official documentation.
What are the principal published specifications?
Network Protocol: IEEE802.3 10BASE-T；100BASE-T IEEE802.3i 10Base-T；IEEE802.3u； IEEE802.3x; Input Voltage: DC9~52V; Input terminal: Phoenix terminal; Protect. Class: IP40
How should this model be selected?
Evaluate network, channel function, power, environment, wiring and mechanical placement as one configuration. ProControl can verify the final bill of materials.
Other models in this category
Compare protocol, channel architecture and environmental limits.
Manufacturer source
Technical data and images are based on the current official Solidot product record. Verify revision-sensitive values before ordering or commissioning. Open official record
Validate the right Solidot SW4-HUP05C architecture with ProControl
Share the network, signal count, environment and installation constraints; our engineering team will review the complete configuration.