Supports BSP
Solidot · Unmanaged Industrial Ethernet Switch
SW4-HUP05D
The SW4-HUP05D is a 5-port 10/100Base-TX unmanaged industrial Ethernet switch supporting industrial communication transmission requirements, designed with advanced automation principles for plug-and-play operation. It incorporates IEEE Energy-Efficient Ethernet (EEE) technology and BSP, while complying with FCC, CE, and RoHS standards. Operating within -40°C to +80°C temperature range with IP40-rated rugged housing, this ultra-compact device delivers exceptional durability for harsh environments and fits confined control cabinets. Featuring DIN-rail mounting capability, wide voltage input (DC 9~56V), ≤5W power consumption, and status LEDs, it provides maintenance-free networking solutions exceeding 300,000 hours MTBF, offering reliable plug-and-play connectivity for industrial Ethernet devices.
Unmanaged Industrial Ethernet Switch
Network ProtocolIEEE802.3、IEEE802.3u、IEEE802.3x
Input VoltageDC9~56V
Input terminalPhoenix terminal
What defines this model
Review the published differences attached to this exact model code rather than only the general family.
IP40 Protection Rating
Wide Voltage Input (DC 9~56V), Power Consumption ≤5W
Compliant with Industrial Standards, MTBF >300,000 Hours
Place in the system architecture
Treat network, product and field layers as one validation flow.
Line, star or ring requirements
Protocol compatibility and latency budget
Supply, temperature, EMC and mounting
Technical parameters
Values come from Solidot's current official model record and must be reconfirmed for the product revision.
Interface Parameters
| Bus Connection | 5×RJ45 |
|---|---|
| RJ45 Port | 10/100BaseT (X) automatic detection, full/half duplex MDI/MDI-X adaptive |
Technical Parameters
| Input Voltage | DC9~56V |
|---|---|
| Installation method | DIN card rail type, wall mounted installation |
| Network Protocol | IEEE802.3、IEEE802.3u、IEEE802.3x |
| Transmission Mode | store and forward |
| MAC address | 2K |
| Cache | 768kbit |
| Backplane bandwidth | 1G |
| Power consumption | ＜5W |
| Operating Temperature | -40℃~+80℃（-40℉~176℉） |
| Exchange Delay | ≤7μs |
| Relative Humidity | 5%~95%, no condensation |
| Storage Temperature | -40℃~+85℃（-40℉~185℉） |
| Input terminal | Phoenix terminal |
| Dual power redundancy | support |
| Protect. Class | IP40 |
| Overcurrent protection | Support built-in overcurrent 4.0A protection |
| Reverse Protection | support |
| Casing | IP40 protection level, metal casing |
| Cooling method | Natural cooling, fanless |
| Module Size | 100×80×44mm |
| Mean Time Between Failures | 300000 hours |
| Weight | 320g |
| Warranty | 5 years |
Product images
Images are official source records for the same model.
Official files
Only links published by the manufacturer for this model are listed.
Frequently asked questions
Core checks before selection and commissioning.
Which industrial network does SW4-HUP05D support?
Network support must be confirmed from the exact model code and current official documentation.
What are the principal published specifications?
Network Protocol: IEEE802.3、IEEE802.3u、IEEE802.3x; Input Voltage: DC9~56V; Input terminal: Phoenix terminal; Protect. Class: IP40
How should this model be selected?
Evaluate network, channel function, power, environment, wiring and mechanical placement as one configuration. ProControl can verify the final bill of materials.
Other models in this category
Compare protocol, channel architecture and environmental limits.
Manufacturer source
Technical data and images are based on the current official Solidot product record. Verify revision-sensitive values before ordering or commissioning. Open official record
Validate the right Solidot SW4-HUP05D architecture with ProControl
Share the network, signal count, environment and installation constraints; our engineering team will review the complete configuration.