Simple configuration, no complex programming required. Configure the gateway by following the manual according to requirements, enabling connection functionality in minimal time.
Solidot · Integrated Gateway Module
GW4U-COM-ECS
The GW4U-COM-ECS is an integrated CANopen Master to EtherCAT Slave Gateway Module. This product enables data communication between EtherCAT and CANopen networks, allowing the integration of CANopen devices into EtherCAT networks.
EtherCATCANopenIntegrated Gateway Module
ProtocolCANopen master/EtherCAT slave
Power Supply24VDC(±5％)
Protect. ClassIP20
What defines this model
Review the published differences attached to this exact model code rather than only the general family.
Supports CANopen interface devices including frequency inverters, stepper motors, servo drives, instruments, PLCs, DCS, FCS, etc.
ESI files are automatically generated by the configuration tool.
CANopen master/EtherCAT slave
Place in the system architecture
Treat network, product and field layers as one validation flow.
Vendor protocol and data map
Connectivity, data mapping and diagnostics
Field data delivered to the control system
Technical parameters
Values come from Solidot's current official model record and must be reconfirmed for the product revision.
Interface Parameters
| Bus Connection | CAN interface,RJ45 |
|---|---|
| Protocol | CANopen master/EtherCAT slave |
Technical Parameters
| Operating Temperature | -25℃~55℃ |
|---|---|
| Power Supply | 24VDC(±5％) |
| Relative Humidity | 95%, no condensation |
| Protect. Class | IP20 |
| Module Size | 40mm×110mm×74mm |
Product images
Images are official source records for the same model.
Official files
Only links published by the manufacturer for this model are listed.
Frequently asked questions
Core checks before selection and commissioning.
Which industrial network does GW4U-COM-ECS support?
Published network support: EtherCAT, CANopen. Confirm controller compatibility and the complete order code before commissioning.
What are the principal published specifications?
Protocol: CANopen master/EtherCAT slave; Power Supply: 24VDC(±5％); Protect. Class: IP20; Operating Temperature: -25℃~55℃
How should this model be selected?
Evaluate network, channel function, power, environment, wiring and mechanical placement as one configuration. ProControl can verify the final bill of materials.
Other models in this category
Compare protocol, channel architecture and environmental limits.
Manufacturer source
Technical data and images are based on the current official Solidot product record. Verify revision-sensitive values before ordering or commissioning. Open official record
Validate the right Solidot GW4U-COM-ECS architecture with ProControl
Share the network, signal count, environment and installation constraints; our engineering team will review the complete configuration.