Electrical class
Rated power: 1000 W · Rated current: 6.4 A · Maximum current: 19.5 A
Samkoon Servo
Samkoon R8-2210Z-N
Rated power: 1000 W
Samkoon R8-2210Z-N belongs to the R8 servo drives for different power and command architectures portfolio. Electrical class, motion output and command architecture must be matched as one drive-and-machine system.
Rated output power1000 W
Rated output current6.4 A
Product typeEtherCAT Bus Type
Input voltageSingle-phase AC 220 V/Three-phase AC 220 V
Four points that define this configuration
Each point is tied to published model data or an explicit engineering verification step.
Motion output
Match torque-speed duty to the machine inertia and operating cycle.
Command and network
Product type: EtherCAT Bus Type
Motor and mechanics match
Dimensions: 57 × 199 × 182 mm · Protection: IP30 · Temperature: 0–45 °C (non-freezing)
System architecture
Match the complete motion chain
A valid selection joins the electrical supply, drive stage, motor mechanics and control interface.
Supply and drive stageRated power: 1000 W · Rated current: 6.4 A · Maximum current: 19.5 A
Motor and loadMotor frame, torque-speed duty and machine inertia
Command and feedbackProduct type: EtherCAT Bus Type
Examine the product from every side
Review the front panel, rear I/O and connector layout before planning the enclosure.
Specifications arranged for engineering review
All source-qualified values are visible by topic; no decision-critical data is hidden behind an expandable panel.
Mechanical construction
| Outer dimensions | 57 × 199 × 182 mm |
|---|---|
| Weight | 1500 g |
System and certification
| Protection rating | IP30 |
|---|
Motion and control
| Control mode | CSP (Cycle-synchronised position) 1 ms · CSV (Cycle-synchronised velocity) 500 µs · CST (Cycle-synchronised torque) 125 µs · PP (Profile position) 1 ms · PV (Profile velocity) 500 µs · PT (Profile torque) 125 µs · HM (Homing) 1 ms |
|---|
Power and interfaces
| Rated output power | 1000 W |
|---|---|
| Rated output current | 6.4 A |
| Maximum output current | 19.5 A |
| Communication protocol | CoE:CANopenoverEtherCAT |
| Input voltage | Single-phase AC 220 V/Three-phase AC 220 V |
Environment and software
| Operating temperature | 0–45 °C (non-freezing) |
|---|---|
| Programming software | SamkoonServoSetup |
| Operating humidity | 5%–95% RH (non-condensing) |
Other technical details
| Physical layer | 100BASE-TX |
|---|---|
| Transfer rate | 2 × 100 Mbps |
| Synchronisation jitter | <1US |
| Product type | EtherCAT Bus Type |
Where this configuration can be evaluated
These are engineering fit scenarios; final approval depends on project-specific electrical, mechanical and safety checks.
Positioning axes
Axes whose torque, speed, feedback and command requirements match the complete drive-motor set.
Packaging and handling motion
Cyclic motion applications sized from the real load profile rather than model code alone.
Controller integration
Motion axes whose command and feedback architecture is confirmed from the exact variant.
OEM motion subsystems
Repeatable drive, motor, cable and feedback packages documented as one approved configuration.
Official product and catalogue records
Use these manufacturer records to confirm model identity, lifecycle and the current document revision.
Compare nearby configurations with named technical fields
Only published values are compared; a dash means that the current source does not state the field.
| Model | Rated power | Rated current | Product type |
|---|---|---|---|
| R8-2210Z-NCurrent model | 1000 W | 6.4 A | EtherCAT Bus Type |
| R8-2215P-N | 1500 W | 8.4 A | Pulse Type |
| R8-2210P-N | 1000 W | 6.4 A | Pulse Type |
| R8-2215Z-N | 1500 W | 8.4 A | EtherCAT Bus Type |
Answers needed before model approval
Answers use published values where available and identify the checks that still require the current official record.
What electrical class is published?
Rated power: 1000 W · Rated current: 6.4 A · Maximum current: 19.5 A
What torque and speed are stated?
No structured torque and speed value is available in the current source; confirm it with the motor match.
Which command interface is used?
Product type: EtherCAT Bus Type
Can the motor be selected independently?
No. Confirm drive, motor, encoder, brake, cable and mechanical load as one engineering set.
Official product records
Current product-centre record — Listed in Samkoon's current .cn product centre.
Technical sources
Official sources checked on 24 August 2026. Samkoon current product centre · R8 Series model table
Confirm the right Samkoon configuration
Share the application, I/O, communication and mounting requirements with our engineering team.