IP67 rating, suitable for harsh industrial environments
Series representative image — the manufacturer's model image is currently unavailable
Solidot · IO-Link Hub
IOL7A-A8C-M12
The IOL7A Series Signal Hub (hereinafter referred to as "HUB") supports IO-Link communication. It is an 8-channel IO-Link analog module that is compatible with both analog voltage and current input and output. As an IO-Link slave device, it can connect to IO-Link master devices of any brand, fulfilling users' needs for acquiring process data and transmitting diagnostic and configuration data.
IO-LinkIO-Link Hub
ProtocolIO-Link
Interface typeM12，A-code，4Pin
Power Supply24 VDC（18V～30.2V）
What defines this model
Review the published differences attached to this exact model code rather than only the general family.
Compatible with both analog voltage and current signals, supporting configurable input/output channels
Simplified wiring with simultaneous power and data transmission
Compatible with all major IO-Link master systems
Place in the system architecture
Treat network, product and field layers as one validation flow.
PROFINET or EtherNet/IP layer between PLC and master
Port mode, cycle and process-data management
Process and diagnostic data over standard cabling
Technical parameters
Values come from Solidot's current official model record and must be reconfirmed for the product revision.
Interface Parameters
| Interface type | M12，A-code，4Pin |
|---|---|
| Cable length | ≤20m（Between the HUB and the master station） |
| Protocol | IO-Link |
Technical Parameters
| Operating Temperature | -25℃~+70℃ |
|---|---|
| Power Supply | 24 VDC（18V～30.2V） |
| Protect. Class | IP67 |
| Module Size | 165*58*30.5 mm |
模拟量输入
| 输入点数 | 最大8 |
|---|---|
| 最大8 | 输入类型 |
| 电压型 | 电流型 |
| 输入信号 | Disable、0V~10V、0V~5V、1V~5V（量程可调，默认为0V~10V） |
| Disable、4mA~20mA、0mA~20mA（量程可调，默认为0mA~20mA） | 输入信号类型 |
| 单端信号 | 通道反应时间 |
| 100us/8ch | 分辨率 |
| 16bits | 采样速率（全通道） |
| ≤1ksps | 精度 |
| 25℃时±0.1%，全温度范围±0.3% | 输入滤波 |
| 支持 | 平滑级数 |
| 1~200 | 输入阻抗（电压型） |
| ≥175kΩ | - |
| 输入阻抗（电流型） | - |
| ≤200Ω | 通道允许最大电压（电压型） |
| 30V | - |
| 通道允许最大电流（电流型） | - |
| 30mA | 输入过载保护 |
| 支持钳位保护 | 支持限流保护 |
| 输入保护 | ±30V |
| ±30mA | 隔离耐压 |
| 500VDC | 额定电流消耗 |
| 80mA | 80mA |
| 功耗 | 2W |
模拟量输出
| 输出点数 | 最大8 |
|---|---|
| 最大8 | 输出类型 |
| 电压型 | 电流型 |
| 输出信号 | Disable、0V~10V、0V~5V、1V~5V（量程可调，默认为0V~10V） |
| Disable、4mA~20mA、0mA~20mA（量程可调，默认为0mA~20mA） | 通道反应时间 |
| 200us/8ch | 分辨率 |
| 13bits | 精度 |
| 25℃时±0.1%，全温度范围±0.3% | 负载阻抗（电压型） |
| ≥2kΩ（1kΩ精度：25℃时0.3%，全温±0.5%） | - |
| 负载阻抗（电流型） | - |
| ≤500Ω | 输出保护 |
| 过载保护、开路保护、短路保护（均为自动恢复机制） | 隔离耐压 |
| 500VDC | 额定电流消耗 |
| 100mA | 200mA |
| 功耗 | 2.5W |
| 5W | 非OP状态下清空保持可选功能 |
Product images
The image represents the manufacturer's official series record; the unavailable model-specific image is clearly identified.
Official files
Only links published by the manufacturer for this model are listed.
ZIPIOL7A series EPLAN macrosOfficial Solidot fileZIPIOL7A Series Hub 2D drawingOfficial Solidot fileZIPIOL7A Series Hub 3D drawingOfficial Solidot fileIODD1.1IOL7A series IOL7A-A8C-M12 configure fileOfficial Solidot filePDFIOL7A-A8C-M12 Analog Voltage and Current Input/Output Compatible Module User ManualOfficial Solidot filePDFIOL7A-A8C-M12 Analog Voltage and Current Input/Output Compatible Module User ManualOfficial Solidot file
Frequently asked questions
Core checks before selection and commissioning.
Which industrial network does IOL7A-A8C-M12 support?
Published network support: IO-Link. Confirm controller compatibility and the complete order code before commissioning.
What are the principal published specifications?
Protocol: IO-Link; Interface type: M12，A-code，4Pin; Power Supply: 24 VDC（18V～30.2V）; Protect. Class: IP67
How should this model be selected?
Evaluate network, channel function, power, environment, wiring and mechanical placement as one configuration. ProControl can verify the final bill of materials.
Other models in this category
Compare protocol, channel architecture and environmental limits.
Manufacturer source
Technical data and images are based on the current official Solidot product record. Verify revision-sensitive values before ordering or commissioning. Open official record
Validate the right Solidot IOL7A-A8C-M12 architecture with ProControl
Share the network, signal count, environment and installation constraints; our engineering team will review the complete configuration.