Supports PROFINET interface devices including frequency inverters, intelligent field measurement devices, instruments, PLCs, DCS, FCS, encoders, motors, etc.

GW4U-PNM-CBS
The GW4U-PNM-CBS is an integrated PROFINET Master to CC-Link IE Field Basic Slave Gateway Module that enables interconnection between PROFINET and CC-Link IE Field Basic networks. Functioning as a PROFINET slave, the module features two network ports and supports connecting multiple PROFINET slaves through either daisy-chain topology or star topology via a PROFINET switch. Operating as a CC-Link IE Field Basic master, the module is equipped with two network ports and supports daisy-chain connection of multiple slaves.
What defines this model
Review the published differences attached to this exact model code rather than only the general family.
No complex programming required; configure the gateway according to requirements to enable connection functionality in minimal time.
PROFINET master/CC-Link IE Field Basic slave
20.4VDC~28.8VDC
Place in the system architecture
Treat network, product and field layers as one validation flow.
Vendor protocol and data map
Connectivity, data mapping and diagnostics
Field data delivered to the control system
Technical parameters
Values come from Solidot's current official model record and must be reconfirmed for the product revision.
Interface Parameters
| Bus Connection | RJ45,RJ45 |
|---|---|
| Protocol | PROFINET master/CC-Link IE Field Basic slave |
Technical Parameters
| Power Supply | 20.4VDC~28.8VDC |
|---|---|
| Protect. Class | IP20 |
| Module Size | 40mm×110mm×74mm |
Product images
Images are official source records for the same model.

Official files
Only links published by the manufacturer for this model are listed.
Frequently asked questions
Core checks before selection and commissioning.
Which industrial network does GW4U-PNM-CBS support?
Published network support: PROFINET, CC-Link IE Field Basic, CC-Link. Confirm controller compatibility and the complete order code before commissioning.
What are the principal published specifications?
Protocol: PROFINET master/CC-Link IE Field Basic slave; Power Supply: 20.4VDC~28.8VDC; Protect. Class: IP20; Module Size: 40mm×110mm×74mm
How should this model be selected?
Evaluate network, channel function, power, environment, wiring and mechanical placement as one configuration. ProControl can verify the final bill of materials.
Other models in this category
Compare protocol, channel architecture and environmental limits.
Technical data and images are based on the current official Solidot product record. Verify revision-sensitive values before ordering or commissioning. Open official record
Validate the right Solidot GW4U-PNM-CBS architecture with ProControl
Share the network, signal count, environment and installation constraints; our engineering team will review the complete configuration.