AWG28
Solidot · Auxiliary Module
TM40-1000-2
Terminal block with matching cable 1m (for PNP input)
Auxiliary Module
Cable specificationsAWG28
Conductor composition7/0.127
Conductor materialSoft copper wire
What defines this model
Review the published differences attached to this exact model code rather than only the general family.
7/0.127
Soft copper wire
PE
Place in the system architecture
Treat network, product and field layers as one validation flow.
Control network and backplane bus
Digital, analogue, temperature and special-function channels
Power, wiring and field-device matching
Technical parameters
Values come from Solidot's current official model record and must be reconfirmed for the product revision.
Technical Parameters
| Cable specifications | AWG28 |
|---|---|
| Conductor composition | 7/0.127 |
| Conductor material | Soft copper wire |
| Insulating Material | PE |
| Twisting of core wire | Fill, cotton thread, tape, paper bag |
| Covered on the outside | PVC |
| Conductor resistance (20°C) | Below 239 Ω/Kn |
| Voltage Resistance (Air) | AC500V/min |
| Insulation Resistance (20°C) | Above 50M Ω/Kn |
Product images
Images are official source records for the same model.
Official files
Only links published by the manufacturer for this model are listed.
No model-specific public file is listed in the current official record. Ask ProControl for the latest approved document set.
Frequently asked questions
Core checks before selection and commissioning.
Which industrial network does TM40-1000-2 support?
Network support must be confirmed from the exact model code and current official documentation.
What are the principal published specifications?
Cable specifications: AWG28; Conductor composition: 7/0.127; Conductor material: Soft copper wire; Insulating Material: PE
How should this model be selected?
Evaluate network, channel function, power, environment, wiring and mechanical placement as one configuration. ProControl can verify the final bill of materials.
Other models in this category
Compare protocol, channel architecture and environmental limits.
Manufacturer source
Technical data and images are based on the current official Solidot product record. Verify revision-sensitive values before ordering or commissioning. Open official record
Validate the right Solidot TM40-1000-2 architecture with ProControl
Share the network, signal count, environment and installation constraints; our engineering team will review the complete configuration.