DC24V
Solidot · Auxiliary Module
TM40-32AE
32-bit terminal block with lights, NPN
Auxiliary Module
Input VoltageDC24V
Input Current1A
Suitable wireBelow 1.5mm2/AWG16
What defines this model
Review the published differences attached to this exact model code rather than only the general family.
1A
Below 1.5mm2/AWG16
Confirm the complete model code against the host controller, network protocol and connected modules.
Place in the system architecture
Treat network, product and field layers as one validation flow.
Control network and backplane bus
Digital, analogue, temperature and special-function channels
Power, wiring and field-device matching
Technical parameters
Values come from Solidot's current official model record and must be reconfirmed for the product revision.
Technical Parameters
| Input Voltage | DC24V |
|---|---|
| Input Current | 1A |
| Suitable wire | Below 1.5mm2/AWG16 |
Product images
Images are official source records for the same model.
Official files
Only links published by the manufacturer for this model are listed.
No model-specific public file is listed in the current official record. Ask ProControl for the latest approved document set.
Frequently asked questions
Core checks before selection and commissioning.
Which industrial network does TM40-32AE support?
Network support must be confirmed from the exact model code and current official documentation.
What are the principal published specifications?
Input Voltage: DC24V; Input Current: 1A; Suitable wire: Below 1.5mm2/AWG16
How should this model be selected?
Evaluate network, channel function, power, environment, wiring and mechanical placement as one configuration. ProControl can verify the final bill of materials.
Other models in this category
Compare protocol, channel architecture and environmental limits.
Manufacturer source
Technical data and images are based on the current official Solidot product record. Verify revision-sensitive values before ordering or commissioning. Open official record
Validate the right Solidot TM40-32AE architecture with ProControl
Share the network, signal count, environment and installation constraints; our engineering team will review the complete configuration.