Drive filters evaluated by EMI, output-waveform and harmonic requirements.
Filter-family representative image — not an exact photo of the selected current class.
Every record states its official manufacturer source, selection checklist and image scope.
Filter-family representative image — not an exact photo of the selected current class.
VKS-EFI is a three-phase input EMC/EMI filter family. The datasheet lists 5–1200 A models, leakage-current values, connection options and mechanical drawings. Installed EMC performance also depends on system wiring and grounding.
Open technical pageFilter-family representative image — not an exact photo of the selected current class.
VKS-EFO is a three-phase output EMC/EMI filter family. The datasheet lists 5–1200 A models, leakage-current values, connection options and mechanical drawings. Installed EMC performance also depends on system wiring and grounding.
Open technical pageFilter-family representative image — not an exact photo of the selected current class.
VKS-OSK is a passive L/C harmonic filter for the supply side of six-pulse rectifier or drive loads. The standard datasheet specifies residual current THD of at most 10% at full load. It is not a motor-output filter; load profile and site power-factor compensation must be considered together.
Open technical pageFilter-family representative image — not an exact photo of the selected current class.
The SF sine-wave filter is a low-pass network between a PWM drive and motor. It is intended to smooth voltage pulses and reduce insulation and bearing stress. Selection must consider the model-specific minimum switching frequency as well as current.
Open technical pageProduct identity, images and technical statements on this page are based on the linked official Veikong source. Reconfirm revision-sensitive values at project approval.
Open official recordFor Drive Filters selection, share motor, supply, control, environment and duty-cycle data with our engineering team.