Application-specific solutions published for pump, multi-pump, high-protection and spindle-servo duties.
Official manufacturer brochure cover — not an exact photo of the configured product.
Every record states its official manufacturer source, selection checklist and image scope.
Official manufacturer brochure cover — not an exact photo of the configured panel.
The manufacturer's three-sheet drawing illustrates a constant-pressure system with one drive and three pumps. It is not a fixed-rating cabinet datasheet; the actual panel must be engineered against pump nameplates and site requirements.
Open technical page
Solution representative image — not a model image tied to an exact series code.
The official PDF contains only a photograph of a pump-mounted drive with a pressure tank. With no readable series code or technical ratings, this record should be treated as an application example.
Open technical page
The S6 family is a spindle-specific CNC servo drive supporting asynchronous and permanent-magnet synchronous motors. Analog/pulse S6, EtherCAT S6C and M3 S6M are distinct interface variants. Select motor/spindle encoder compatibility, current rating and braking together.
Open technical pageSeries representative image — the manufacturer’s VFD200A model image could not be verified.
VFD200A is a general-purpose asynchronous-motor drive with V/F and vector-control functions. Closed-loop control requires a PG card; Modbus-RTU is the documented available bus. Select power, current and mounting dimensions against the duty rating and nameplate.
Open technical pageOfficial manufacturer brochure cover — not an exact photo of the configured product.
The official page is titled IP54, but the linked brochure's cover and technical table identify VFD510 IP65. Electrical and mechanical values are therefore not accepted as verified IP54 specifications.
Open technical page
VFD510 IP55 is a high-protection drive for environments with dust and water mist. It provides V/F, sensorless vector and encoder-based vector control. Standard Modbus must be distinguished from optional industrial-network cards.
Open technical page
VK30 is a pump-drive family for keypad pressure setting and pressure-feedback control. The brochure's VK30-coded selection table is documented below; its mixed VK20 artwork requires confirmation of enclosure protection before ordering.
Open technical pageProduct identity, images and technical statements on this page are based on the linked official Veikong source. Reconfirm revision-sensitive values at project approval.
Open official recordFor Application-Specific Drives selection, share motor, supply, control, environment and duty-cycle data with our engineering team.