Occupies small space, fast speed, quick wiring, pluggable terminal blocks
Solidot · Adapter/Coupler
XB6-CB2002ST
CC-Link IE Field Basic Coupler Kit: Features a built-in Ethernet switch, including the CC-Link IE Field Basic Coupler (XB6-CB0002), 2A Power Supply (XB6-P2000H), and Terminal Cover Plate (XB6-CVR00). It provides 2 Ethernet bus interfaces and 1 backplane X-Bus interface, with dimensions of 106 x 61 x 47 mm. The kit delivers a 2000mA drive circuit for the coupler and subsequent I/O modules, offering compact size, high speed, quick wiring, plug-in terminal blocks, and simple configuration. Compatible with Mitsubishi FX5U, L, IQ-R, and other PLCs. It supports a high-speed X-Bus with up to 32 slave stations at full load, a maximum scan cycle of 1 ms, and has an IP20 protection rating.
CC-Link IE Field BasicCC-LinkAdapter/Coupler
ProtocolCC-Link IE Field Basic
Bus Interface2*RJ45
Power Interface3-pin spring clamp connector
What defines this model
Review the published differences attached to this exact model code rather than only the general family.
Simple configuration, compatible with Mitsubishi FX5U, L, IQ-R and other PLCs
High-speed X-bus backplane bus, full load of 32 slave stations, maximum scan cycle 1ms
CC-Link IE Field Basic
Place in the system architecture
Treat network, product and field layers as one validation flow.
Control network and backplane bus
Digital, analogue, temperature and special-function channels
Power, wiring and field-device matching
Technical parameters
Values come from Solidot's current official model record and must be reconfirmed for the product revision.
Interface Parameters
| Protocol | CC-Link IE Field Basic |
|---|---|
| Max. Number of IO Modules | 32 |
| Data Transfer Medium | CAT5 Ethernet cable |
| Bus Interface | 2*RJ45 |
| Data Transfer Rates | 100Mb/s |
| Distance Between Stations | 100m |
| Electrical Isolation | YES |
Technical Parameters
| Current Consumption | 1600mA ( subsequent IO modules） |
|---|---|
| Operating Temperature | -10~60℃ |
| Power Supply | 24VDC(18~36V) |
| Relative Humidity | 95 %, no condensation |
| Storage Temperature | -20~75℃ |
| Protect. Class | IP20 |
| Module Size | 106*61*47mm |
| Weight | approximate 300g |
| Power Interface | 3-pin spring clamp connector |
Product images
Images are official source records for the same model.
Official files
Only links published by the manufacturer for this model are listed.
Frequently asked questions
Core checks before selection and commissioning.
Which industrial network does XB6-CB2002ST support?
Published network support: CC-Link IE Field Basic, CC-Link. Confirm controller compatibility and the complete order code before commissioning.
What are the principal published specifications?
Protocol: CC-Link IE Field Basic; Bus Interface: 2*RJ45; Power Interface: 3-pin spring clamp connector; Max. Number of IO Modules: 32
How should this model be selected?
Evaluate network, channel function, power, environment, wiring and mechanical placement as one configuration. ProControl can verify the final bill of materials.
Other models in this category
Compare protocol, channel architecture and environmental limits.
Manufacturer source
Technical data and images are based on the current official Solidot product record. Verify revision-sensitive values before ordering or commissioning. Open official record
Validate the right Solidot XB6-CB2002ST architecture with ProControl
Share the network, signal count, environment and installation constraints; our engineering team will review the complete configuration.