Supports two-channel encoder
Solidot · Pulse Counter Module
XB6-P20D
Supports two types of orthogonal encoder inputs, with a counting rate of up to 500KHz. Supports linear counting from 0-4294967295 with 32 bits. Supports ring counting and 4x/2x/1x counting rates. Features power-off memory function, Z-phase reset, and four configurable latch channels.
Pulse Counter Module
Encoder Input2 ch
Compare output functionNot supported at the moment
Protect. ClassIP20
What defines this model
Review the published differences attached to this exact model code rather than only the general family.
Supports 32-bit linear counting from 0 to 4294967295
Four latch channels can be arbitrarily configured
Automatically clears the count value under specific pulses
Place in the system architecture
Treat network, product and field layers as one validation flow.
Network and host-controller compatibility
Channel, interface and function selection
Power, connection, environment and mechanical layout
Technical parameters
Values come from Solidot's current official model record and must be reconfirmed for the product revision.
Interface Parameters
| Connection Method | Push in spring connection |
|---|---|
| Data Transfer Medium | X-bus backplane bus |
| Data Transfer Rates | 6Mb/s |
| Electrical Isolation | Yes |
Technical Parameters
| Current Consumption | 44mA |
|---|---|
| Rated voltage | 5VDC |
| Operating Temperature | -10~60℃ |
| Relative Humidity | 95%, no coagulation |
| Storage Temperature | -20~75℃ |
| Protect. Class | IP20 |
| Module Size | 106*73*25.7mm (installation width 22.5mm) |
| Weight | 100g |
Functional Parameters
| Process data volume: Downlink | 12Byte |
|---|---|
| Process data volume: Upstream | 20Byte |
| Digital IO | Input: 4 ch ,PNP/NPN Output: 4 ch ,PNP |
| Analog IO | NO |
| Encoder Input | 2 ch |
| Encoder signal | Orthogonal |
| Counting rate | ≤500KHZ |
| Clearing Z Phase | Support |
| Hardware latch function | Configurable latch signal |
| Compare output function | Not supported at the moment |
| Counting Rate Setting | 4x/2x/1x (default 4x) |
| Resolution Settings | Supports 0-65535 (default is 0) |
| Ring Counting | Supports (0-resolution*counting multiplier-1) |
| Linear counting | Support (0-4294967295) |
| Setting the Initial Value of the Counter | Support |
| Hardware filtering | Support: 0-15 (default 7) |
| Count Range Selection | Support:(0-4294967295) |
| Reverse counting | Support |
Product images
Images are official source records for the same model.
Official files
Only links published by the manufacturer for this model are listed.
Frequently asked questions
Core checks before selection and commissioning.
Which industrial network does XB6-P20D support?
Network support must be confirmed from the exact model code and current official documentation.
What are the principal published specifications?
Encoder Input: 2 ch; Compare output function: Not supported at the moment; Protect. Class: IP20; Operating Temperature: -10~60℃
How should this model be selected?
Evaluate network, channel function, power, environment, wiring and mechanical placement as one configuration. ProControl can verify the final bill of materials.
Other models in this category
Compare protocol, channel architecture and environmental limits.
Manufacturer source
Technical data and images are based on the current official Solidot product record. Verify revision-sensitive values before ordering or commissioning. Open official record
Validate the right Solidot XB6-P20D architecture with ProControl
Share the network, signal count, environment and installation constraints; our engineering team will review the complete configuration.