Occupies fewer nodes, one coupler can support up to 32 slots and 1024 points
Series representative image — the manufacturer's model image is currently unavailable
Solidot · Adapter/Coupler
XB6S-EI2002
New generation EtherNet/IP coupler: Built-in Ethernet switch, 2 channels of EtherNet/IP bus interface, IN, OUT and 1 backplane X-bus interface. The size is 106*61*47mm and provides a 2000mA driving circuit for the coupler and subsequent IO modules. It occupies small space, has fast speed, quick wiring with pluggable terminals, simple configuration and is compatible with most EIP master stations such as KEYENCE, Omron, Schneider Electric and AB. It has high-speed X-bus bus with up to 32 slave devices loaded at maximum scan cycle of 1ms. Its protection level is IP20.
EtherNet/IPAdapter/Coupler
ProtocolEtherNet/IP
Bus Interface2*RJ45
Power Interface3 pin
What defines this model
Review the published differences attached to this exact model code rather than only the general family.
Supports flexible expansion and configuration, can integrate digital, analog, motion control modules etc.
The communication interface complies with communication standards and supports mainstream EtherNet/IP master stations
Uses X-bus as backplane bus: minimum scan cycle is 200us, typical value is 1ms
Place in the system architecture
Treat network, product and field layers as one validation flow.
Control network and backplane bus
Digital, analogue, temperature and special-function channels
Power, wiring and field-device matching
Technical parameters
Values come from Solidot's current official model record and must be reconfirmed for the product revision.
Interface Parameters
| Minimum Cycle Time | 2ms |
|---|---|
| Input and output process data volume | 504Bytes |
| Protocol | EtherNet/IP |
| Max. Number of IO Modules | 32 |
| Data Transfer Medium | Ethernet CAT5 cable |
| Bus Interface | 2*RJ45 |
| Data Transfer Rates | 100Mb/s |
| Distance Between Stations | 100m（station to station） |
Technical Parameters
| diagnosis | Support |
|---|---|
| Alarm | Support |
| Firmware Upgrade | Support |
| Operating Temperature | -20~60℃ |
| Power Supply | 24VDC（18V~36V） |
| Relative Humidity | 95 %, no condensation |
| Storage Temperature | -40~80℃ |
| Protect. Class | IP20 |
| Module Size | 106.4*43*61mm |
| Weight | 160g |
| Power Interface | 3 pin |
Product images
The image represents the manufacturer's official series record; the unavailable model-specific image is clearly identified.
Official files
Only links published by the manufacturer for this model are listed.
PDFIOConfigTool User ManualOfficial Solidot fileZIPSolidotech IOConfigToolOfficial Solidot fileZIPXB6S Series 2D DiagramOfficial Solidot fileZIPXB6S Series 3D DiagramOfficial Solidot fileEDSXB6S-EI2002 I/O EDS FileOfficial Solidot filePDFXB6S-EI2002(-C) coupler slice I/O module user manualOfficial Solidot filePDFXB6S-EI2002(-C) coupler slice I/O module user manualOfficial Solidot file
Frequently asked questions
Core checks before selection and commissioning.
Which industrial network does XB6S-EI2002 support?
Published network support: EtherNet/IP. Confirm controller compatibility and the complete order code before commissioning.
What are the principal published specifications?
Protocol: EtherNet/IP; Bus Interface: 2*RJ45; Power Interface: 3 pin; Minimum Cycle Time: 2ms
How should this model be selected?
Evaluate network, channel function, power, environment, wiring and mechanical placement as one configuration. ProControl can verify the final bill of materials.
Other models in this category
Compare protocol, channel architecture and environmental limits.
Manufacturer source
Technical data and images are based on the current official Solidot product record. Verify revision-sensitive values before ordering or commissioning. Open official record
Validate the right Solidot XB6S-EI2002 architecture with ProControl
Share the network, signal count, environment and installation constraints; our engineering team will review the complete configuration.