Measurement types support thermocouples (TC), RTDs, and resistance (R)
Solidot · Temperature Module
XB6S-A80TM-A
The new generation slice type 8-channel temperature acquisition module, supports types of sensors such as thermal resistors and thermocouples. It uses the X-bus bottom bus, adapts to the XB6S series coupler, the module occupies a small space and has high practicality, providing guarantees for users' high-speed data collection, system configuration optimization, simplification of field wiring, and improvement of system reliability.
Temperature Module
Bus InterfaceReed Contact
Input FilteringSingle-channel filtering, configurable (levels 1-10)
Analog Inputs8
What defines this model
Review the published differences attached to this exact model code rather than only the general family.
Supports internal cold junction compensation, external cold junction compensation, and cold junction compensation disabled
Sensitivity: 0.1℃, supports single-channel filter settings
Temperature sensor supports disconnection detection
Place in the system architecture
Treat network, product and field layers as one validation flow.
Control network and backplane bus
Digital, analogue, temperature and special-function channels
Power, wiring and field-device matching
Technical parameters
Values come from Solidot's current official model record and must be reconfirmed for the product revision.
Interface Parameters
| Data Transfer Medium | X-bus Backplane Bus |
|---|---|
| Bus Interface | Reed Contact |
| Data Transfer Rates | 6Mb/s |
| Electrical Isolation | YES |
Technical Parameters
| Module Abnormality Self-Recovery | Support |
|---|---|
| diagnosis | Support |
| Alarm | Support |
| Firmware Upgrade | Support |
| Operating Temperature | -20℃~+60℃ |
| Power Supply | 5VDC（4.5V~5.5V） |
| Relative Humidity | 95 %, no condensation |
| Storage Temperature | -40℃~+80℃ |
| Protect. Class | IP20 |
| Module Size | 106.4*25.7*72.3mm |
| Weight | 110g |
Analog
| Input Filtering | Single-channel filtering, configurable (levels 1-10) |
|---|---|
| Power consumption | 0.55W |
| Sensor Type | TC, RTD, TD |
| Conversion Time | TC：29ms/ch 115ms/8ch RTD，TD：73ms/ch 290ms/8ch |
| Sensitivity | TC，RTD：0.1℃ TD：±0.1Ω |
| Noise Suppression | 50Hz、60Hz、10Hz、none |
| Excitation Current | <2mA |
| Electrical Isolation | 500VDC |
| Analog Inputs | 8 |
| Signal Voltage/Current | TC：29ms/ch 115ms/8ch RTD，TD：73ms/ch 290ms/8ch |
| Resolution | 16bit（int type） |
| Accurate | TC：±0.3% @25℃ (F.S.), ±0.5% @-20~60℃ (F.S.) RTD：±0.1% @25℃ (F.S.)，±0.3% @-20~55℃ (F.S.) TD：±0.1% @25℃ (F.S.)，±0.3% @-20~55℃ (F.S.) |
| Input Resistance | ≥10KΩ |
| Indicator | Green LED |
Product images
Images are official source records for the same model.
Official files
Only links published by the manufacturer for this model are listed.
Frequently asked questions
Core checks before selection and commissioning.
Which industrial network does XB6S-A80TM-A support?
Network support must be confirmed from the exact model code and current official documentation.
What are the principal published specifications?
Bus Interface: Reed Contact; Input Filtering: Single-channel filtering, configurable (levels 1-10); Analog Inputs: 8; Input Resistance: ≥10KΩ
How should this model be selected?
Evaluate network, channel function, power, environment, wiring and mechanical placement as one configuration. ProControl can verify the final bill of materials.
Other models in this category
Compare protocol, channel architecture and environmental limits.
Manufacturer source
Technical data and images are based on the current official Solidot product record. Verify revision-sensitive values before ordering or commissioning. Open official record
Validate the right Solidot XB6S-A80TM-A architecture with ProControl
Share the network, signal count, environment and installation constraints; our engineering team will review the complete configuration.