Supports selection of bridge voltage
Solidot · Function Module
XB6-A20SG
XB6-A20SG is a slice strain collection module that supports strain sensors. It uses the X-bus bottom bus and is compatible with our company's XB6 series coupler modules. The module supports functions such as bridge voltage switching and bridge connection method selection.
Function Module
Channel indicator lightGreen LED
Number of channel2
Channel DisabledSupport
What defines this model
Review the published differences attached to this exact model code rather than only the general family.
Supports selection of bridge connection method
Each channel supports disconnection detection
Can set standard range, extended range two modes
Place in the system architecture
Treat network, product and field layers as one validation flow.
Control network and backplane bus
Digital, analogue, temperature and special-function channels
Power, wiring and field-device matching
Technical parameters
Values come from Solidot's current official model record and must be reconfirmed for the product revision.
Interface Parameters
| Connection Method | Reed Contact |
|---|---|
| Process data volume: Downlink | 4 Bytes |
| Process data volume: Upstream | 12 Bytes |
| Data Transfer Rates | 6Mb/s |
Technical Parameters
| Disconnection detection | Support |
|---|---|
| Overflow function | Support |
| Operating Temperature | -10℃~+60℃ |
| Power Supply | 5 VDC |
| Relative Humidity | 95%, no condensation |
| Storage Temperature | -20℃~+75℃ |
| Protect. Class | IP20 |
| Module Size | 106×73×25.7 mm |
| Weight | 120g |
Functional Parameters
| Input Filtering | Configurable |
|---|---|
| Channel indicator light | Green LED |
| Number of channel | 2 |
| Type of sensor | Full-bridge 4-wire/6-wire sensor, half-bridge 3-wire/5-wire sensor |
| Connection Method | Full bridge 4-wire system/6-wire system, half bridge 3-wire system/5-wire system. |
| Supply Bridge Voltage | 2V /2.5V /3V /3.5V /4V /4.5V /5V |
| Conversion speed | 5ms |
| Output speed | 1ms |
| Input range | Full bridge: ±32mV/VHalf bridge: ±16mV/V |
| Range Mode | Standard range mode, extended range mode |
| Accuracy Requirements | 0.4‰ |
| Channel Disabled | Support |
| Channel Independent | Support |
| Zero point compensation | Half-bridge zero point compensation (16-bit compensation) |
Product images
Images are official source records for the same model.
Official files
Only links published by the manufacturer for this model are listed.
Frequently asked questions
Core checks before selection and commissioning.
Which industrial network does XB6-A20SG support?
Network support must be confirmed from the exact model code and current official documentation.
What are the principal published specifications?
Channel indicator light: Green LED; Number of channel: 2; Channel Disabled: Support; Channel Independent: Support
How should this model be selected?
Evaluate network, channel function, power, environment, wiring and mechanical placement as one configuration. ProControl can verify the final bill of materials.
Other models in this category
Compare protocol, channel architecture and environmental limits.
Manufacturer source
Technical data and images are based on the current official Solidot product record. Verify revision-sensitive values before ordering or commissioning. Open official record
Validate the right Solidot XB6-A20SG architecture with ProControl
Share the network, signal count, environment and installation constraints; our engineering team will review the complete configuration.